Administering the Command Center Web Server

The gpccws web server binary and web application files are installed in the bin directory of your Greenplum Command Center installation.

Starting and Stopping the Web Server

Starting the Command Center Web Server runs the gpccws web server, starts the metrics collection agents on the segment servers, and starts a listener on the Command Center rpc port.

You can run the gpcc command as the gpadmin user on the master host (recommended) or on the standby host. Starting Command Center on the standby host is not recommended because it can cause heavy network traffic between the Command Center agent on the master host and the backend on the standby host.

To ensure the gpcc command is on your path, source the file in the Command Center installation directory or add it to the startup script for your command shell. See Setting the Greenplum Command Center Environment for instructions.

The Greenplum Database MASTER_DATA_DIRECTORY environment variable must be set when you run the gpcc command. This environment variable is usually set in the gpadmin user’s shell initialization script (/home/gpadmin/.bashrc, for example). If you run gpcc without MASTER_DATA_DIRECTORY set, the gpmetrics directory could be created in the current directory instead of in the Greenplum Database data directory, which can cause problems if you start gpcc later with MASTER_DATA_DIRECTORY set correctly.

The gpcc command uses the gpmon role to connect to Greenplum Database. It looks for the gpmon password in the PGPASSWORD environment variable or in the .pgpass file in the gpadmin user’s home directory. You can instead append the -W flag to the gpcc commands below to have gpcc prompt you to enter the password.

To start Greenplum Command Center

Log on to the master host or the standby host.

To log on to the standby from the master host:

$ ssh <standby-host>

Source the Command Center environmental script.

$ source /usr/local/greenplum-cc-<version>/

Start the Command Center web server and the metrics collection agents.

$ gpcc start
Starting the gpcc agents and webserver…
2019/05/07 01:51:03 Agent successfully started on 5/5 hosts
2019/05/07 01:51:03 View Greenplum Command Center at http://mdw:28090

To stop Greenplum Command Center

$ gpcc stop
2019/05/07 01:51:55 GPCC webserver and metrics collection agents have been stopped. Use gpcc start to start them again

To check the Greenplum Command Center status

$ gpcc status
2019/05/07 01:50:13 GPCC webserver: running
2019/05/07 01:50:14 GPCC agents: 5/5 agents running

See the gpcc reference page for full syntax for the gpcc command.

Configuring the Command Center Web Server

The web server configuration file is stored in $GPCC_HOME/conf/app.conf. The parameters in this configuration file are set when you install Greenplum Command Center. The installer copies the Command Center installation directory, including this configuration file, to every Greenplum Database host.

See the Web Server Parameters section of Configuration File Reference for a description of the parameters in this file.

You can see a summary of the current configuration using the gpcc --settings command.

$ gpcc --settings
Install path:              /usr/local
Display Name:              gpcc
GPCC port:                 28080
Kerberos:                  enabled
Kerberos webserver name:   mdw
Kerberos gpdb name:        gpadmin
Kerberos mode:             gpmon_only
Kerberos path:             /home/gpadmin/gpcc-kerberos.keytab
SSL:                       disabled

If you modify the file on one host you should copy it to every other host. Be sure to restart the web server after you change the configuration. Rather than modifying the configuration directly, you can just stop Command Center and re-run the gpccinstall-<version> installation command. This ensures the configuration is consistent on all hosts.

You can use the gpcc krbenable command to add Kerberos authentication to the Command Center configuration. See Enabling Authentication with Kerberos for details about setting up Kerberos on the Command Center host. The gpcc krbenable command prompts for the Kerberos principal names and artifacts and updates the configuration.

The gpcc krbdisable command removes Kerberos parameters from the Command Center configuration.

Viewing and Maintaining Web Server Log Files

Web server access and error log messages are written to $GPCC_HOME/logs/gpccws.log.

If you experience errors viewing the Greenplum Command Center Console, refer to this file for more information.

To prevent the web server log from growing to excessive size, you can set up log file rotation using logrotate or cronolog.